Simple Home Fire Prevention Tips

Losing everything you’ve ever earned to a fire is one of the most devastating things that can happen to a homeowner. Dealing with expensive repairs and building up your life again can be quite difficult. Home fire prevention is a crucial part of safety. Unfortunately, some homeowners tend to forget about its importance.

Preventing a disaster from happening will be more beneficial for you than recovering from one. Here are some things you should know about fire prevention.

Familiarize Yourself With Common Fire Hazards
This is one of the first things you need to do to prevent fires. Keep any matches, lighters, and candles out of reach of children to prevent them from playing with them. Put the cap back on any flammable products and store them away.

When cooking food, never leave it unattended, especially if you have a gas stove. Keep them away from bushes or shrubs as far as possible. Open flames can quickly spread out of control and start a massive fire that can destroy your home.

Install a Smoke Alarm
It’s best if you invest in a good smoke alarm. Ideally, you should have at least one smoke detector installed on every level of your home. Many modern smoke detection systems can last a long time now, only needing to replace the batteries from time to time.

Today, there are now smart alarms that can be connected to your security systems. Should a fire suddenly break out, you and your local fire department will be immediately alerted to the emergency.

Invest in a Good Fire Extinguisher
Having a high-quality fire extinguisher readily available can be quite handy. Fire extinguishers should be stored in your kitchen or garage. Once you have an extinguisher, you should learn how to operate it, so when an emergency occurs, you’ll know what to do. If you’re attempting to extinguish a fire, you need to make sure that everyone else has left the building before using it.

Have a Fire Exit Plan
Everyone living in your home should be aware of an escape plan should a fire suddenly start. Draw it on a piece of paper and place it in an area where everyone can see it, like the fridge.

If you have time, do some practice runs with your escape route. Learn different ways to escape a room, so if the main way is blocked, you’ll still be able to get out. 

Home fire safety doesn’t have to be complicated. If you’re looking for smoke damage services, look no further than InTech Maintenance Solutions. Contact our office and schedule an appointment.

Simple Steps to Water-Damaged Drywall Repair

Drywalls are sheets of finishing material used in construction for interior walls and ceilings. They are easy to install and durable as well, needing only minor maintenance from time to time.

But water damage is a common problem when it comes to drywalls. Water-damaged walls can be a hazard to you and your family if not dealt with properly. Here are the steps to drywall repair you can follow.

Repair the Leak First
Before you do any actual repair work on your walls, it’s best to find the source of the water damage first. Your drywalls won’t be repaired properly if the cause of the leak is not addressed. You can trace the leak by removing the damaged portion of your drywall and following where the watermarks come from. Wear protective equipment when doing this step.

Remove the Damaged Drywall
Once the source of the leak has been dealt with, it’s time to remove the damaged drywall. Place down tarps to catch any excess drywall pieces and debris so that cleanup will be a breeze. Measure the size of the hole that you need to make before doing any cutting.

Cut out a rectangle or square-shaped portion of the damaged area using a keyhole saw. This is done so that it’s easier to patch it all up when you’re done with the repairs.

Replace the Drywall
After removing the old drywall and measuring the hole, place drywall clips around it and secure it tightly with drywall screws. Cut out a patch with the same measurements from a new sheet of drywall and secure it to the drywall clips. Be careful not to over-tighten it and make sure all of the corners are properly lined up before driving the screw.

Once the screws have been placed, apply primer on both sides of the patch. Cover the entire surface and let it dry out overnight before applying additional coatings. Add paint to give your new drywall some color and make the repair much more pleasant to look at.

And that’s everything you need to know about repairing your drywall. If you ever need water damage services, contact InTech Maintenance Solutions immediately. We can help you with the repairs and maintenance that you need.


Reliable Fire Odor Removal Tips You Can Follow

Let’s face it. Experiencing a house fire is devastating to anyone. It’s one of the worst accidents that can happen to anyone’s house as it destroys everything quickly. Not only will your home’s structural foundations be affected but also will be left with more problematic hazards that you will have to deal with later.

One of these problems is smoke odor because it can linger in your home. It can affect the air quality inside the house, and it can even pose long-term health risks and hazards if not dealt with properly. Here are some things you can do for effective fire odor removal.

Ventilate Your Home
The first thing to do is to air out your home properly. Open all of the doors and windows. This lets fresh air circulate into your home and flushes out the smoke particles. It’s also a good idea to place electric fans throughout the house so that they can push out the smoke odor.

Do Deep Cleaning
The next step in smoke smell removal is to clean out your home. Wash and clean up fabrics like clothes, furniture covers, rugs, blankets, and other items made from woven material. Fabrics soak up smoke and soot, and the smell can linger for a while longer if they’re not cleaned properly. Keep all clean woven items away from your home until the smoke smell is all gone.

For upholstery and carpeting, it’s best to have them cleaned by a professional cleaning service. They have the right tools and equipment to properly wash the soot and dirt away from your items. As for hard surfaces such as doors, countertops, and walls, they should be cleaned with a cleaning solution. Mix a half cup of distilled vinegar, a gallon of water, and some dishwashing soap, and use this mixture to clean your hard surfaces.

Replace the filters in your ventilation system and air conditioners as soon as you can. Clean out your HVAC system so that you can be sure that no smoke particles are left. Contact a professional HVAC service for a proper inspection and cleaning.

Repaint the Walls
You may not know it, but smoke particles can stick to the paint in your walls, even after you wash and clean them. If the smoke still won’t go away, it’s best to repaint the walls entirely. Clean off the walls with a cleaning solution of glycol or ammonia. Once they’re dry, apply some odor-locking primer before you paint over it with latex paint to seal it properly. 

Removing the smoke smell from your home keeps everyone safe from its lingering effects. If you need fire damage restoration services, please contact InTech Maintenance Solutions immediately.

Indoor Sewage Spill and Cleanup

sewage cleanup

Your home’s sewer line is crucial in keeping your house safe and sanitary. Its primary function is to pump your wastes away from your home to the public sewage system, protecting water quality and public health.

But certain situations can make your sewer back up and clog. Here is some information on what causes a spill and tips when doing a sewage cleanup.

What Causes Sewer Backup?
Most of the time, clogged or damaged sewer pipes are the main reasons behind a major sewer backup. Downpours are another cause.

Clogged pipes cause clean water and wastewater backflows in different plumbing fixtures inside the house. If your toilets or bathtubs create backflows, then, probably, it’s just the drain connected to those fixtures that are clogged. But if every fixture is acting up, it’s more likely you have a clogged main sewer line.

Meanwhile, old pipes can easily break down and crack due to their age. Once the old pipes get cracked, cause the waste and water that flow through them to overflow and damage your home.

Heavy rain can also cause sewer backup and spill in a home. If there’s so much water and debris, the public sanitary sewers will have a harder time redirecting their flow. Some of that sewage can flow back into your home and flood your basement.

Tips for Indoor Sewage Cleanup
The first thing you need to do when you encounter a sewage backup is to call expert sewage cleanup services immediately. A professional sewer cleanup crew has the right tools and equipment necessary to clean the mess quickly. But before they can even arrive at your location, you can do these few things while you wait, including:

  • Evacuate children, seniors, and pets immediately. Sewage water is full of harmful pathogens that can easily infect the more vulnerable members of your family. Only allow them back in the affected area of the house once the cleanup is done.
  • Turn off your main power line from the main power breaker immediately. Water can conduct electricity. Any exposed electrical wires or appliances can cause electrocution.
  • If exposed to sewage, take a bath and wash your clothes thoroughly.

Cleaning Up After a Sewage Spill
Once you are equipped and ready, thorough cleaning is crucial. After calling the professionals to clean the mess, here are some things you can do.

  • Any loose carpets, upholstery, and furniture should be professionally cleaned and sanitized. Any hard surfaces should be cleaned with hot water and dishwashing liquid. Use detergent for sinks and other plumbing fixtures and then rinse them with bleach.
  • Do not attempt to unclog your drains. The harmful sewer water must be removed first before doing anything else. Standing water must be pumped out slowly

If you need help with water damage repair, contact us at InTech Maintenance Solutions. We offer 24/7 assistance whenever disaster strikes.